Climax
Under the motto " we work for your safety ", Productos Climax applies its business culture in each of its manufacturing processes, to offer a product that guarantees maximum safety and comfort to its users and meets the technical requirements demanded by CE regulations. and with the requirements established by law. The company's technical department designs and develops Climax PPE , depending on the needs of each specific job, which are manufactured under strict quality control , subsequently verified in its own laboratories and in official approval laboratories, to obtain the certificate. correspondent.
Climax PCX-700 Half Mask series
Half mask body
The facial body is made of hypoallergenic thermoplastic. Both the design and the used material provide air-tightness, preventing air from filtering inside through the face/mask union.
The main body houses two non-replaceable filters. Their position offers wide visual field.
Exhalation valve
Large diameter exhalation valve for optimal exhalation
Fastening harness:
It has a comfortable neck and head strap that can be easily adjusted to the appropriate length thanks to its easylock system.
Service Life
Once removed from its original packaging, the mask should be replaced every six months at the most. Replace the mask if it retains any characteristic of the contaminant (smell, taste, irritation) or an increase in resistance to breathing is observed. The contaminated area must be abandoned at that same moment.
Includes a resealable bag for hygienic storage and transportation
R: Reusable mask.
D: Dolomite clogging test passed.
Nominal factor protection (NPF): 33 TLV.
P3 -Protection against particles.
A1/A2- Protection against organic vapours, solvents with a boiling point over 65º C.
ABEK1- protection against inorganic gases and vapours, organic gases and vapours with a boiling point over 65ºC, sulphur dioxide and other acid gases and vapours and ammonia and ammonia derivatives.
CXPCX710-FFA1P3 R D
CXPCX720- FFA2P3 R D
CXPCX730- FFABEK1P3 R D
EN 405:2001+A1:2009.
• A2P3 Filters for CLIMAX Respirators
• EN 14387:2004+A1:2008
Filters organic gases and vapours, dust and toxic particulates and solid or liquid aerosols.
• ABEK2P3 Filters for CLIMAX Respirators
• EN 14387:2004+A1:2008
• For protection against organic gases and vapours with a boiling point > 65 deg c.
• Inorganic gases and vapours, Sulphur Dioxide and other acidic gases and vapours as well as against ammonia and organic ammonia derivatives.
• P3 Filters for CLIMAX Respirators
• EN143:2000 + EN143:2000/AC:2005 + EN143:2000/A1:2006
Filters Fine Toxic Dust, Fumes, Water and Oil based Mists/Aerosols.
Filtered escape half mask protecting the user against chemical products when escaping to a safe and breathable environment. Hood made of PVC without lining. Transparent PVC visor.
Filter type ABEK. It offers protection against a wide range of toxic gases and vapours. It does not provide breathable air
• Clear visor PVC
• Filters 755/756
• Half mask: 756
• Material: PVC without lining
• Nominal protection factor (NPF):50
• Norm: EN 140:1998
Filtered escape half mask protecting the user against chemical products when escaping to a safe and breathable environment. Hood made of PVC without lining. Transparent PVC visor.
It does not provide breathable air.
• Clear visor PVC
• Filters: 760
• Half mask: 761
• Material: PVC without lining
• Nominal protection factor (NPF):50
• Norm: EN 140:1998
Ideal for full-time work in places where there is a risk of falling objects and electrical discharges up to 440 Vac, offering perfect and long-lasting protection
• EN 397 CE Material: ABS
• Head harness Automatic adjustment
• Electrical protection:Up to 440V AC
• Points harness: 4 (estándar)
• 6 (on demand)
• Weight: 355 gr
• 30mm helmet slot
• Sweatband included
• Available with reflective adhesive
Ideal for full-time work in places where there is a risk of falling objects and electrical discharges up to 440 Vac, offering perfect and long-lasting protection
• EN 397 CE Material: ABS
• Head harness Automatic adjustment
• Electrical protection:Up to 440V AC
• Points harness: 4 (estándar)
• 6 (on demand)
• Weight: 355 gr
• 30mm helmet slot
• Sweatband included
• Available with reflective adhesive
Ideal for full-time work in places where there is a risk of falling objects and electrical discharges up to 440 Vac, offering perfect and long-lasting protection
• EN 397 CE Material: ABS
• Head harness Automatic adjustment
• Electrical protection:Up to 440V AC
• Points harness: 4 (estándar)
• 6 (on demand)
• Weight: 355 gr
• 30mm helmet slot
• Sweatband included
• Available with reflective adhesive
The Climax 5-RG safety helmet has been designed and manufactured to ensure optimal impact protection from objects such as stones, roofing tiles, bricks and other items of similar weight as well as from electrical discharges up to 1000Vac or 1500Vdc
• EN 397 CE
• EN 50365 CE Material: HDPE
• Head harness Automatic adjustment
• Electrical protection: Up to 1000V AC and 1500V DC (low voltage installations)
• Points harness: 6
• Class: 0
• Weight: 322 gr
• 30mm helmet slot
• Sweatband included
•Some self assembly may be required•
The Climax 5-RG safety helmet has been designed and manufactured to ensure optimal impact protection from objects such as stones, roofing tiles, bricks and other items of similar weight as well as from electrical discharges up to 1000Vac or 1500Vdc
• EN 397 CE
• EN 50365 CE Material: HDPE
• Head harness Automatic adjustment
• Electrical protection: Up to 1000V AC and 1500V DC (low voltage installations)
• Points harness: 6
• Class: 0
• Weight: 322 gr
• 30mm helmet slot
• Sweatband included
•Some self assembly may be required•
The Climax 5-RG safety helmet has been designed and manufactured to ensure optimal impact protection from objects such as stones, roofing tiles, bricks and other items of similar weight as well as from electrical discharges up to 1000Vac or 1500Vdc
• EN 397 CE
• EN 50365 CE Material: HDPE
• Head harness Automatic adjustment
• Electrical protection: Up to 1000V AC and 1500V DC (low voltage installations)
• Points harness: 6
• Class: 0
• Weight: 322 gr
• 30mm helmet slot
• Sweatband included
•Some self assembly may be required•
Attaches Climax face carrier to their range of helmets
• Face carrier - CXFSH
• Adapter suitable for the CADI safety helmet
• Material: ABS with high-quality ultraviolet stabilization.
• Inside protection: High density polystyrene, protective padding.
• Chinstrap:4 points textile anchor.
• Adjustable head band with a toothed wheel.
• Aeration holes
• Headband 54cm to 61cm
• Can be used for work at height
EN 12492:2012
Complies with the requirements for impact protection and puncture resistance
EN 397:2012+A1:2012
• Material: ABS with high-quality ultraviolet stabilization.
• Inside protection: High density polystyrene, protective padding.
• Chinstrap:4 points textile anchor.
• Adjustable head band with a toothed wheel.
• Aeration holes
• Headband 54cm to 61cm
• Can be used for work at height
EN 12492:2012
Complies with the requirements for impact protection and puncture resistance
EN 397:2012+A1:2012
Accessory suitable for safety helmets to prevent the drop of the helmet. Chin strap with chin rest made of polyethylene with plastic hooks anchored at each elastic band end. The elastic band is made of polyester and 14 mm width.
Suitable helmets:
5-RS
5-RG
Tirreno TX
Tirreno TXR
Curro
For use with:
5-RS
5-RG
Tirreno TX
Tirreno TXR
Cadí
• Accessory suitable for safety helmets to prevent the drop of the helmet. Well-adapted to the chin.
• Chin strap with chin rest made of polyethylene with plastic hooks anchored at each elastic band end.
• The elastic band is made of polyester and 14 mm width. Weight: 0’013kg.
For use with:
5-RS
5-RG
Tirreno TX
Tirreno TXR
The Climax5-RS safety helmet has been designed and manufactured to ensure optimal impact protection from objects such as stones, roofing tiles, bricks and other items of similar weight as well as from electrical discharges up to 1000Vac or 1500Vdc.
• EN 397 CE
• EN 50365 CE Material: HDPE
• Head harness: Manual adjustment
• Electrical protection: Up to 1000V AC and 1500V DC (low voltage installations)
• Points harness: 6
• Class: 0
• Weight: 322 gr
• 30mm helmet slot
• Sweatband included
•Some self assembly may be required•
The Climax5-RS safety helmet has been designed and manufactured to ensure optimal impact protection from objects such as stones, roofing tiles, bricks and other items of similar weight as well as from electrical discharges up to 1000Vac or 1500Vdc.
• EN 397 CE
• EN 50365 CE Material: HDPE
• Head harness: Manual adjustment
• Electrical protection: Up to 1000V AC and 1500V DC (low voltage installations)
• Points harness: 6
• Class: 0
• Weight: 322 gr
• 30mm helmet slot
• Sweatband included
•Some self assembly may be required•
The Climax5-RS safety helmet has been designed and manufactured to ensure optimal impact protection from objects such as stones, roofing tiles, bricks and other items of similar weight as well as from electrical discharges up to 1000Vac or 1500Vdc.
• EN 397 CE
• EN 50365 CE Material: HDPE
• Head harness: Manual adjustment
• Electrical protection: Up to 1000V AC and 1500V DC (low voltage installations)
• Points harness: 6
• Class: 0
• Weight: 322 gr
• 30mm helmet slot
• Sweatband included
•Some self assembly may be required•
The Climax 410 hand-held welding shield has been designed to provide effective protection against the radiation emitted during welding processes, as well as against incandescent particles released during such processes. The welding shield is also recommended for protection against the impact of low energy, high velocity particles
• EN 169 CE
• EN 175 CE Material: Polyamide and Fiberglass
• Welding glass measurements:
• 105 x 50 mm
• 110 x 55 mm
The Climax 324 RG visor offers effective protection against the risk of particle impact at high speed and medium energy, protection against drops and liquid splashes and resistance to UV radiation. Visor with anti-scratch treatment
• Anti-scratch treatment
• Optical class: 1
• Size: 389 x 201 x 1,5mm
• Weight: 0,139 kg.
• Suitable with face shields 324-RG, 436-I and 437-I
• Regulation: EN 166:2001 & EN 170:2002
• Metal mesh visor appropiate for protection against particles generated in forestry work (splinters, vegetation and particles).
• Mesh size: 1.089 mm.
• Made of iron mesh painted with black epoxy paint.
• Anti-impact
• Size: 380 x 208 x 0,3 (mm)
• Marks: Climax EN 1731 S CE
• Weight: 0,161 kg.
• Visor replacement compatible with face shields models: 425, 436 mesh and 437
• Regulation (EU) 2016/425
• Norms: EN 1731
