• Zip front with double storm flap and press stud closure
• Fixed hood
• Wind cuffs
• Adjustable leg opening with press stud closure
• Mesh polyester lining
• Simply no Sweat (SNS) 210gsm Polyester laminate fabric
• Highly breathable providing great comfort
• Durable and cost effective
• Smooth textile finish
• Conforms to EN ISO 20471:2013 Class 3 High Visibility
• Conforms to EN343:2003+A1:2007 Class 3:3
• Conforms to EN ISO 13688:2013 General requirements for protective clothing
• Zip front with storm flap cover and press stud closure
• Fixed hood
• Elasticated cuffs with press stud closure
• 2 front pockets with flap
• Mesh polyester lining
• Simply no Sweat (SNS) 210gsm Polyester laminate fabric
• Highly breathable providing great comfort
• Durable and cost effective
• Smooth polyester textile finish
• Conforms to EN343 Class 3 Water penetration
• Conforms to EN343 Class 3 Breathability
• Concealed zip front with double storm flap cover and press stud closure
• Hood in collar with draw cords
• Hood with innovative fixture for improved hearing through hood
• 2 chest pockets with flap
• Fixed ID pocket on a band
• Napoleon pocket
• Inner pocket
• 2 front pockets with flap
• Adjustable cuffs using hook and loop fastening
• Used in combination with the Weert, quilted lining HYD040350
• Glow in the Dark (GID) tape for improved visibility in low lighting environments
• GID tape is an enhancement to the garment and not an intrinsic part of EN ISO 20471
• Approximately 8 hours of glow once charged for 5-10 minutes dependent on light source
• No batteries required
• 220 gsm PU coated Ripstop Polyester
• Conforms to EN ISO 20471:2013 Class 3 High Visibility
• Conforms to EN343:2003+A1:2007 Class 3:3
• Conforms to EN ISO 13688:2013 General requirements for protective clothing
• Concealed zip front with double storm flap cover and press stud closure
• Fixed quilted lining
• Fixed linings may diminish the breathability of a garment
• Hood in collar with draw cords
• Hood with innovative fixture for improved hearing through hood
• 2 chest pockets with flap
• Fixed ID pocket on a band
• Napoleon pocket
• Inner pocket
• 2 zip side pockets
• Adjustable cuffs using hook and loop fastening
• Adjustable extended back using hook and loop fastening
• Glow in the Dark (GID) tape for improved visibility in low lighting environments
• GID tape is an enhancement to the garment and not an intrinsic part of EN ISO 20471
• Approximately 8 hours of glow once charged for 5-10 minutes dependent on light source
• No batteries required
• 220 gsm PU coated Ripstop Polyester
• Conforms to EN ISO 20471:2013 Class 3 High Visibility
• Conforms to EN343:2003+A1:2007 Class 3:3
• Conforms to EN ISO 13688:2013 General requirements for protective clothing
• Adjustable elastic waist
• 2 Side pockets
• Thigh pocket with flap
• Double rule pocket
• 2 back pockets
• Knee pockets
• Good comfort and freedom of movement
• Can be used in combination with the Swing pocket set, Hessle HYD0410003
• Glow in the Dark (GID) tape for improved visibility in low lighting environments
• GID tape is an enhancement to the garment and not an intrinsic part of EN ISO 20471
• Approximately 8 hours of glow once charged for 5-10 minutes dependent on light source
• No batteries required
• 300 gsm
• 65% polyester/35% cotton in Non-Hi vis fabric
• 80% polyester/20% cotton in Hi-Vis fabric
• Conforms to EN ISO 20471:2013 Class 1 High Visibility
• Conforms to EN ISO 13688:2013 General requirements of protective clothing
• Metal free black and grey safety trainer
• Nylon mesh upper with TPU toe overlay
• Padded tongue and collar
• Five eyelet fasten
• Antistatic
• Composite toecap and midsole
• PU foam high comfort full length footbed
• Pull on loop at heel
• Fuel and oil resistant outsole
• SRC slip resistant
• EN ISO 20345:2011 S3 SRC
•POLYPROPYLENE HD EXTERNAL SHELL
Lightweight external shell with exponential better performance.
Excels in impact absorption, especially at lower temperatures
(-30ºC). Resists yellowing and degradation.
• Sanitized antibacterial treatment acts as an internal deodorant
• Ratchet system with triple adjustment - width, height and rotation for perfect, secure fit
•New, eco-leather chinstrap designed with new, rear adjustment
points for a more personalized fit. Accommodates wider sizes and
adapts to earmuff use. Color-coded fastener indicate which EN
standard the chinstrap meets.
• Easy direct connection with accessories
• Dielectric design
• Universal-adjustable
• Multilateral hit protection ensured
• EPS inner shell for best shock absorption and protection
• Conforms to EN 397 and EN 12492 impact requirements
• EN 397 chinstrap designed to release if snagged (strength less than 25daN)
• Certified EN50365, protecting from 1000ac and 1500dc
• Full face visor KAWVI00008-015 available (Requires KAWAC00009 adapter and KAWAC00010 carrier)
• Visors KAWVI00007-009 and KAWVI00007-015 available (Requires KAWAC00009 adapter)
• Ear Defenders KAWHP00001-202, KAWHP00001-203 and KAWHP00001-205 available (Clips straight in, no adapter required)
•POLYPROPYLENE HD EXTERNAL SHELL
Lightweight external shell with exponential better performance.
Excels in impact absorption, especially at lower temperatures
(-30ºC). Resists yellowing and degradation.
• Sanitized antibacterial treatment acts as an internal deodorant
• Ratchet system with triple adjustment - width, height and rotation for perfect, secure fit
•New, eco-leather chinstrap designed with new, rear adjustment
points for a more personalized fit. Accommodates wider sizes and
adapts to earmuff use. Color-coded fastener indicate which EN
standard the chinstrap meets.
• Easy direct connection with accessories
• Dielectric design
• Universal-adjustable
• Multilateral hit protection ensured
• EPS inner shell for best shock absorption and protection
• Conforms to EN 397 and EN 12492 impact requirements
• EN 397 chinstrap designed to release if snagged (strength less than 25daN)
• Certified EN50365, protecting from 1000ac and 1500dc
• Full face visor KAWVI00008-015 available (Requires KAWAC00009 adapter and KAWAC00010 carrier)
• Visors KAWVI00007-009 and KAWVI00007-015 available (Requires KAWAC00009 adapter)
• Ear Defenders KAWHP00001-202, KAWHP00001-203 and KAWHP00001-205 available (Clips straight in, no adapter required)
•POLYPROPYLENE HD EXTERNAL SHELL
Lightweight external shell with exponential better performance.
Excels in impact absorption, especially at lower temperatures
(-30ºC). Resists yellowing and degradation.
• Sanitized antibacterial treatment acts as an internal deodorant
• Ratchet system with triple adjustment - width, height and rotation for perfect, secure fit
•New, eco-leather chinstrap designed with new, rear adjustment
points for a more personalized fit. Accommodates wider sizes and
adapts to earmuff use. Color-coded fastener indicate which EN
standard the chinstrap meets.
• Easy direct connection with accessories
• Dielectric design
• Universal-adjustable
• Multilateral hit protection ensured
• EPS inner shell for best shock absorption and protection
• Conforms to EN 397 and EN 12492 impact requirements
• EN 397 chinstrap designed to release if snagged (strength less than 25daN)
• Certified EN50365, protecting from 1000ac and 1500dc
• Full face visor KAWVI00008-015 available (Requires KAWAC00009 adapter and KAWAC00010 carrier)
• Visors KAWVI00007-009 and KAWVI00007-015 available (Requires KAWAC00009 adapter)
• Ear Defenders KAWHP00001-202, KAWHP00001-203 and KAWHP00001-205 available (Clips straight in, no adapter required)
•POLYPROPYLENE HD EXTERNAL SHELL
Lightweight external shell with exponential better performance.
Excels in impact absorption, especially at lower temperatures
(-30ºC). Resists yellowing and degradation.
• Sanitized antibacterial treatment acts as an internal deodorant
• Ratchet system with triple adjustment - width, height and rotation for perfect, secure fit
•New, eco-leather chinstrap designed with new, rear adjustment
points for a more personalized fit. Accommodates wider sizes and
adapts to earmuff use. Color-coded fastener indicate which EN
standard the chinstrap meets.
• Easy direct connection with accessories
• Dielectric design
• Universal-adjustable
• Multilateral hit protection ensured
• EPS inner shell for best shock absorption and protection
• Conforms to EN 397 and EN 12492 impact requirements
• EN 397 chinstrap designed to release if snagged (strength less than 25daN)
• Certified EN50365, protecting from 1000ac and 1500dc
• Full face visor KAWVI00008-015 available (Requires KAWAC00009 adapter and KAWAC00010 carrier)
• Visors KAWVI00007-009 and KAWVI00007-015 available (Requires KAWAC00009 adapter)
• Ear Defenders KAWHP00001-202, KAWHP00001-203 and KAWHP00001-205 available (Clips straight in, no adapter required)
• Certified to EN 12492 (The standard for Mountaineers and industrial work at heights)
• Lightweight external shell with exponential better performance.
• Excels in impact absorption, especially at lower temperatures (-30ºC). Resists yellowing and degradation.
• Washable and removable soft padding with FAST3DRY Technology
• Helmet designed with 8 air intakes that maximize internal airflow through outflow channels providing exceptional helmet breathability.
• Sanitised antibacterial treatment acts as an internal deodorant
• Adaptive fit system patented technology
• Easy direct connection with accessories
• Front slot for badge holder KAW00048 or Kask front lamp
• Dielectric design, Universal-adjustable
• Multilateral hit protection ensured
• EPS inner shell for best shock absorption and protection
• 3 years warranty and up to 10 years’ service life
• Sticker or printed corporate logo available on request
• Certified to EN 12492 (The standard for Mountaineers and industrial work at heights)
• Lightweight external shell with exponential better performance.
• Excels in impact absorption, especially at lower temperatures (-30ºC). Resists yellowing and degradation.
• Washable and removable soft padding with FAST3DRY Technology
• Helmet designed with 8 air intakes that maximize internal airflow through outflow channels providing exceptional helmet breathability.
• Sanitised antibacterial treatment acts as an internal deodorant
• Adaptive fit system patented technology
• Easy direct connection with accessories
• Front slot for badge holder KAW00048 or Kask front lamp
• Dielectric design, Universal-adjustable
• Multilateral hit protection ensured
• EPS inner shell for best shock absorption and protection
• 3 years warranty and up to 10 years’ service life
• Sticker or printed corporate logo available on request
• Certified to EN 12492 (The standard for Mountaineers and industrial work at heights)
• Lightweight external shell with exponential better performance.
• Excels in impact absorption, especially at lower temperatures (-30ºC). Resists yellowing and degradation.
• Washable and removable soft padding with FAST3DRY Technology
• Helmet designed with 8 air intakes that maximize internal airflow through outflow channels providing exceptional helmet breathability.
• Sanitised antibacterial treatment acts as an internal deodorant
• Adaptive fit system patented technology
• Easy direct connection with accessories
• Front slot for badge holder KAW00048 or Kask front lamp
• Dielectric design, Universal-adjustable
• Multilateral hit protection ensured
• EPS inner shell for best shock absorption and protection
• 3 years warranty and up to 10 years’ service life
• Sticker or printed corporate logo available on request
• Approved to EN 12492 (The standard for Mountaineers and industrial work at heights
• Maximum ventilation. The air intakes and internal outflow channels guarantee effective breathability
• Helmet is equipped with strong external carrying clips with front antislide insert, compatible with all headlamps with elastic bands
• The air intakes are equipped with an anti-intrusion grille that prevents entry of debris whilst maintaining breathability
• Four point chinstrap crossed at the back to secure the helmet to the head better. Safety release system allows quick fastening and opening of the locking mechanism in conformity with EN 12492. Provided with lateral divider for adjusting the length of straps
• Special hook on the chinstrap which allows the helmet to be attached to the harness
• The Sanitized® treatment is an antibacterial treatment that acts as an internal deodorant counteracting the development of unpleasant odours. Thanks to its hygienic function, it effectively prevents bacterial proliferation by increasing freshness and comfort of the fabric in contact with skin.
• High-tech fabric that dries very quickly, helping the dispersion of moisture to the outside and leaving a pleasant feeling of freshness.
• The innovative and exclusive UP & Down technology ensures a precise and comfortable fit around the neck. A centre wheel and two side flaps allow quick adjustment of the helmet not only in width but also in height and tilt.
• Provided with attachment for fitting visors
• Range of face visors available which simply attach to the helmet.
• Full face visor KAWVI00003-015 is available (no screws required)
• Visors KAWVI00002-009 and KAWVI00002-015 available (No screws required)
• Ear Defenders KAWHP00001-202, KAWHP00001-203 and KAWHP00001-205 available (Bayonet adapter KAWAC00003 required)
Plasma Product Updates
• NEW Quick Fit System Improved stability on the neck, better overall, comfort, and improved fit with accessories.
• IMPROVED Anti-Intrusion Mesh, Upgraded debris protection with greater resistance and longer durability.
• AESTHETIC UPDATES- NEW Black Headlamp Clips, NEW Black Headband, NEW Color-Coded Buckle corresponds to EN standards Orange = EN 397,Green = EN 12492
• Washable soft padding with 2DRY technology for maximum comfort
• Sanitized antibacterial treatment acts as internal deodorant
• Maximum ventilation thanks to the ten air intakes
• Micrometrical adjustment system provides quick and precise adjustment
• Universal-adjustable
• Multilateral hit protection ensured
• EPS inner shell for best shock absorption and protection
• Conforms to EN397
• Full face visor KAWVI00003-015 is available (no screws required)
• Visors KAWVI00002-009 and KAWVI00002-015 available (No screws required)
• Ear Defenders KAWHP00001-202, KAWHP00001-203 and KAWHP00001-205 available (Bayonet adapter KAWAC00003 required)
Plasma Product Updates
• NEW Quick Fit System Improved stability on the neck, better overall, comfort, and improved fit with accessories.
• IMPROVED Anti-Intrusion Mesh, Upgraded debris protection with greater resistance and longer durability.
• AESTHETIC UPDATES- NEW Black Headlamp Clips, NEW Black Headband, NEW Color-Coded Buckle corresponds to EN standards Orange = EN 397,Green = EN 12492
• Recessed blade reduces cut injuries and damaged goods
• Cuts boxes, film, tape, and thousands more applications
• Small, convenient, and durable with high quality carbon steel blade
• Disposable
• Recessed blade reduces cut injuries and damaged goods
• Cuts boxes, film, tape, and many more applications
• Increased blade exposure, with recessed durable high quality carbon steel blade
• Larger Multi-position handle for ergonomic ease of use, with piercing tape splitter
• Produced using advanced polymers
• Highest Safety Level
• Disposable
Features
• Form-fitting glove with reinforced palm patch and finger tips
• Durable synthetic leather base palm
• Original synthetic leather vintage puller
• PVC grip crotch
• Contrast yellow colour fourchetes and binding
• Cat 2
Applications
• Multi-purpose
• Landscaping
• Forestry Lumberyards
• Cable and Wire work
• Maintenance and Repair
• Material Handling
EN388:2003
• Level 3 - Abrasion
• Level 2 - Cut Resistance
• Level 4 - Tear Resistance
• Level 1 - Puncture
Features
• Form-fitting glove with reinforced palm patch and finger tips
• Durable synthetic leather base palm
• Original synthetic leather vintage puller
• PVC grip crotch
• Contrast yellow colour fourchetes and binding
• 3-Cut finger glove
Applications
• Multi-purpose
• Landscaping
• Forestry Lumberyards
• Cable and Wire work
• Maintenance and Repair
• Material Handling
EN388:2003
• Level 3 - Abrasion
• Level 2 - Cut Resistance
• Level 4 - Tear Resistance
• Level 1 - Puncture
Features
• Durable black Meshed Fabric
• Synthetic leather Nails Pinch Protection with maximum dexterity
• Heavy Spandex fabric on Fourchettes
• Yellow piping on Knuckle lower line for durability
Applications
• Multi-Purpose
• Heavy Assembling
• Power Tool Handling
• Maintenance and Repair
• Box handling and Glass handling
• Engineering Equipment Operations
• Transportation
• Industrial Grip Work
EN388:2003
• Level 3 - Abrasion
• Level 1 - Cut Resistance
• Level 2 - Tear Resistance
• Level 1 - Puncture
High-visibility 15-gauge nylon shell provides eye-catching luminance.
Oil-resistant micro foam coated grip provides gripping power in slick conditions.
Machine washable.
For industrial workers, the V-Gard® Helmet-Mounted Hearing Protection Line delivers enhanced comfort and top-of-the-line performance with upgrades in fit and style—all without compromising the quality expected from the legendary V-Gard brand.
• Passive helmet mounted ear defenders
• Medium attenuation, SNR 32 dB
• Yellow colour coding for easy identification
• Available in 2 other levels of attenuations, MSA10190356 SNR 28 dB and MSA1090358 SNR 36 dB
• Work with MSA V-Gard slotted Industrial helmets and MSA V-Gard visors & frames
• Matte material for cup and ear pads decreases look of wear and tear
• Includes the next generation "V" design from the Iconic V-Gard
• Foam injected ear pads cushion for soft points of contact
• Custom MSA sealing rings for optimal comfort & SNR performance
• Upgraded fork design for sleek look and modernized feel
• Improved sealing ring and adapters optimize pressure on the ears for all day comfort
• Recessed interior foam doesn't touch user's ear while in use
• Vertical adjustment for custom fit
• Parking position to easily stow the earmuffs when not in use
• Conforms to EN352-3:2002 Hearing protectors. Safety requirements and testing. Ear-muffs attached to an industrial safety helmet
Working at heights safety helmet designed for tower climbing, forestry, rescue and confined spaces. The V-Gard® H1 Safety Helmet provides exceptional comfort and ease of use in a stylish low-profile hard hat design. A complete above-the-neck platform for all applications.
• Fas-Trac® III Pivot Ratchet Suspension for superior comfort, adjustability, and range of motion
• Non-contact foam liner maximizes air flow and breathability for optimal cooling and hygiene.
• Tri-vented option for optimal air flow and cooling (Non-vented option for use in electrical applications)
• Field replaceable 4-point chinstraps with multiple adjustment points for customized fit and comfort
• Premium moisture wicking headband with breathable foam and hook and loop attachment for easy field replacement.
• Patented “push-button” accessory attachment rail and universal clips for head lamps enables quick installation and removal, with no need for an additional carrier
• Low profile design, even with a visor or spectacles attached
• Convenient rescue whistle integrated into the chin strap buckle
• Matte finish HDPE shell
The V-Gard® H1 Safety Helmet provides exceptional comfort and ease of use in a stylish low-profile hard hat design. A complete above-the-neck platform for all applications.
• Fas-Trac® III Pivot Ratchet Suspension for superior comfort, adjustability, and range of motion
• Non-contact foam liner maximizes air flow and breathability for optimal cooling and hygiene.
• Non-vented option for use in electrical applications (Tri-vented option for optimal air flow and cooling )
• Field replaceable 4-point chinstraps with multiple adjustment points for customized fit and comfort
• Premium moisture wicking headband with breathable foam and hook and loop attachment for easy field replacement.
• Patented “push-button” accessory attachment rail and universal clips for head lamps enables quick installation and removal, with no need for an additional carrier
• Low profile design, even with a visor or spectacles attached
• Convenient rescue whistle integrated into the chin strap buckle
• Matte finish HDPE shell
• Standard reflective stickers
• Optional logo customisation in up to 3 locations
• Compatible with a wide range of H1 attachments including face shields, spectacles and V-Gard ear defenders
• Electrically insulating helmet meeting EN 397:2012 Industrial safety helmets 440 V AC and EN 50365 Insulating helmets for use on low voltage installations 1000 V AC
-
239 Products
