The CAT GEN7 has been re-designed, making it the most effective Combat Application Tourniquet® to date. The new CAT GEN7 is simpler to use thanks to a single application protocol, single buckle routing system and further improvements to its components and construction.
The Single Routing Buckle is a direct response to in-depth reviews of field and testing reports. Featuring a new single-routing buckle system, the GEN7 allows for simpler and faster application with more efficient slack removal resulting in decreased blood loss with fewer windlass turns.

1. SINGLE ROUTING BUCKLE
Decreased blood loss, effective slack removal, fewer windlass turns, simplified training with single protocol application standards
4. WINDLASS STRAP
New reinforced strap, grey colour for tactical considerations (Black only)
5. STABILIZATION PLATE
Reinforced, bevelled contact bar, improved comfort
2. WINDLASS ROD
Increased diameter, enhanced strength, aggressive ribbing improves grip
6. FREE-MOVING INTERNAL BAND
Patented band within band, truly even distribution of circumferential pressure
3. WINDLASS CLIP
Bilateral bevelled entry, rapid windlass lock, bilateral buttress, added strength BUCKLESINGLE

• Individually wrapped alcohol free cleansing wipes
• Ideal for cleaning area around cuts and grazes prior to dressing
• Consists of 0.5% Cetrimide and 0.2% Chlorhexdine Gluconate
• Meets the HSE First Aid regulations for use in a first aid kit
• Wipe size: 20cm x 10cm for a large surface area
• Supplied in grip seal bag
• Box of 10 wipes

• CE EN394 ISO12402 approved
• Capable to produce 100+ decibel sound
• Non-corrosive and buoyant in seawater
• Suitable for either belt or lanyard / cord attachment
• New enhanced ergonomic feel
• Finger grip area makes whistle easier to hold
• Bright orange polypropylene construction

Sanibel is the perfect mug for drinking beverages on the go. The mug has a double insulated wall, keeping drinks warm for a long time. The twist-on thumb-slide lid makes it easy to drink up to 400 ml of beverages. Moreover, the handle with the ergonomic thumb rest ensures a good grip. The Sanibel mug consists of stainless steel and black plastic, making it very strong, corrosion-resistant, and easy to clean. Stainless Steel, Plastic.
• Material Stainless Steel, Plastic
• Colour Silver
• Width 12,00 cm
• Height 18,00 cm
• Diameter 8,00 cm
• Weight 234 gram

10 person evacuation kit contents
• Emergency holdall
• Wind up torch
• Safety light stick x 5
• Wind up radio
• Compact megaphone
• Emergency phone charger
• Hi visibility vest
• Hazard barrier tape
• Foil blankets x 10
• Notebook with pencil
• Transparent A4 grip seal bag
• Transparent grip seal bag – large
• Sterile burn dressing x 2
• First aid kit, comprising of ,
• 1 x Guidance note
• 4 x Non woven triangular bandages
• 2 x Large sterile dressing (180 x 180mm)
• 6 x Medium sterile dressing (120 x 120mm)
• 2 x Sterile eye pad dressing
• 20 x Assorted sterile waterproof plasters
• 6 x Alcohol free cleansing wipes
• 1 x Pair of disposable vinyl gloves
• 6 x Safety pins

If you find a tick bite, you need to remove it quickly, safely, and in the correct manner.
It should be done within 8 hours, using the Care Plus® Tick Remover.
The Tick Remover is supplied with two alcohol swabs for disinfecting the bite locations after the tick has been removed.
• Specially developed gripping jaws (for nymphs too)
• Minimal risk of damaging ticks

• 15-gauge nylon liner
• Fully coated with latex
• Water resistant
• Dry/wet grip

• EN388: 2016
• Level 2 - Abrasion
• Level X - Cut Resistance
• Level 4 - Tear Resistance
• Level 1 - Puncture
• Level A - ISO 13997 Cut Resistance

• Double coated latex
• 13-gauge napped acrylic liner
• Wet/dry grip
• Extra cold resistance

• EN388: 2016
• Level 1 - Abrasion
• Level X - Cut Resistance
• Level 4 - Tear Resistance
• Level 1 - Puncture
• Level B - ISO 13997 Cut Resistance

• EN 511: 2006
• Level 0 - Convective Cold
• Level 1 - Contact Cold
• Level 1 - Water Permeability

• EN 407: 2004
• Level X - Burning Behaviour
• Level 2 - Contact Heat
• Level X - Convective heat
• Level X - Radiant heat
• Level X - Small splashes of Molten Metal
• Level X - Large splashes of Molten Metal

• Double coated nitrile offers water and oil resistance
• Wet/dry grip
• Washable and can be tumble dried (Follow instructions)

• EN388: 2016
• Level 4 - Abrasion
• Level X - Cut Resistance
• Level 2 - Tear Resistance
• Level 1 - Puncture
• Level B - ISO 13997 Cut Resistance

• EN 511: 2006
• Level X - Convective Cold
• Level 2 - Contact Cold
• Level X - Water Penetration

• Double coated nitrile
• 13-gauge HPPE/Glass Fiber/Spandex liner
• Wet/dry grip
• Offers fantastic oil and water resistance
• Washable and can be tumble dried (follow instructions)

• EN 388: 2016
• Level 4 - Abrasion
• Level X - Cut resistance
• Level 4 - Tear resistance
• Level 3 - Puncture
• Level D - ISO 13997 Cut Resistance

FEATURES
• Dependable grip, excellent flexibility and a comfortable ergonomic shape.
• Puncture-resistant with latex coating
• Lined with two layers of Titan Armour
• Makes a great general-purpose work glove
• ASTM F2878 14.4 newtons of puncture protection (hypodermic needle)
•• The protective area is on the palm side of the glove only••

• EN388: 2016
• Level 2 - Abrasion
• Level X - Cut Resistance (Coupe Test)
• Level 4 - Tear Resistance
• Level 4 - Puncture
• Level F - ISO 13997 Cut Resistance

• EN 407: 2004
• Level X - Burning Behaviour
• Level 2 - Contact Heat
• Level X - Convective heat
• Level X - Radiant heat
• Level X - Small splashes of Molten Metal
• Level X - Large splashes of Molten Metal

• Please note: there is no European standard for needle resistance. Current industry practice is to utilize the American Standard ASTM F2878 as a guide, and to allow comparisons between different products. These products are not needle proof. Your own risk assessment therefore needs to be undertaken to decide the suitability of this product.

• Sizes S-XL comes in boxes of 100 pieces.
• Size XXL comes in boxes of 90 pieces.

• Powder Free black textured Nitrile Gloves
• CE category III
• Excellent elasticity
• Textured for added grip
• 7 mil

• EN420: 2003 +A1:2009

• EN 388:2016+A1:2018
• Level 0 - Abrasion Resistance
• Level X - Cut resistance (Coupe Test)
• Level 0 - Tear Resistance
• Level 0 - Puncture Resistance
• Level A - TDM Cut Resistance (ISO 13997)

• EN 374-1:2016
• EN 374-4: 2013
• EN 374-5: 2016

Chemical - Breakthrough Time
n-Heptane(J) - More than 30 Mins (level 2).
Sodium Hydroxide 40%(K) - More than 480 Mins (level 6).

Additional Chemical Test
Ammonia 25% - More than 10 Mins (level 1).
Formaldehyde 37%- More than 480 Mins (level 6).
Hydrogen Peroxide 30% - More than 480 Mins (level 6).

• Non-slip, lightweight compression bandage
• Polyester and elasthane fabric.
• Stretched length approx 4.5m
• Hand tearable and water-resistant
• Individually wrapped for cleanliness
• Use for support, compression and securing applications

• Non-slip, lightweight compression bandage
• Polyester and elasthane fabric.
• Stretched length approx 4.5m
• Hand tearable and water-resistant
• Individually wrapped for cleanliness
• Use for support, compression and securing applications
• Blue bandages are ideal for food handling environments

• Non-slip, lightweight compression bandage
• Polyester and elasthane fabric.
• Stretched length approx 4.5m
• Hand tearable and water-resistant
• Individually wrapped for cleanliness
• Use for support, compression and securing applications

• Non-slip, lightweight compression bandage
• Polyester and elasthane fabric.
• Stretched length approx 4.5m
• Hand tearable and water-resistant
• Individually wrapped for cleanliness
• Use for support, compression and securing applications
• Blue bandages are ideal for food handling environments

• Non-slip, lightweight compression bandage
• Polyester and elasthane fabric.
• Stretched length approx 4.5m
• Hand tearable and water-resistant
• Individually wrapped for cleanliness
• Use for support, compression and securing applications
• Blue bandages are ideal for food handling environments

Our range of Body Fluid Spill kits and Sharps handling kits are designed to enable any worker to deal with the problems of body fluids such as blood and vomit and the problem of discarded needles and syringes. These kits are easy to use and address all the issues that are caused by cross contamination and infections caused by Bio Hazards.

The HSE guidance on 'Blood - borne viruses in the workplace' (leaflet INDG342) and there is a provision under COSHH that employers have a legal duty to assess the risk of cross infection for employees and others affected by your work.

Carrying a Click Medical spill or sharps handling kit, will help meet these requirements and increase the confidence of employees, knowing that you as the employer are dealing with the risk attached to biohazards and their control.

Supplied in grip seal bag, this kit contains:

• 1 x CM0620 Clean Up pack consisting of:
• Instructions
• Soft Vinyl Gloves (1 pair)
• Polythene oversleeves (1 pair)
• Polythene apron
• Polypropylene scoop and scrape
• Biohazard Bag
• Non woven wipe
•Disinfectant wipe

Plus

• 1 x 50ml disinfectant spray
• 1 x Super absorbent powder sachet (10g)

This one application kit is designed to deal with any single application to handle body fluids and can be bought singularly or in bulk as a refill for your kits or as a back up for large, multiple or continuing risks.

Our range of Body Fluid Spill kits and Sharps handling kits are designed to enable any worker to deal with the problems of body fluids such as blood and vomit and the problem of discarded needles and syringes. These kits are easy to use and address all the issues that are caused by cross contamination and infections caused by Bio Hazards.

The HSE guidance on 'Blood - borne viruses in the workplace' (leaflet INDG342) and there is a provision under COSHH that employers have a legal duty to assess the risk of cross infection for employees and others affected by your work.

Carrying a Click Medical spill or sharps handling kit, will help meet these requirements and increase the confidence of employees, knowing that you as the employer are dealing with the risk attached to biohazards and their control.

Supplied in grip seal bag, this kit contains:

• Instructions
• Soft Vinyl Gloves (1 pair)
• Polythene oversleeves (1 pair)
• Polythene apron
• Polypropylene scoop and scrape
• Biohazard Bag
• Non woven wipe
• Disinfectant wipe

This is the basic clean up pack that should be used in conjunction with disinfectant spay and our super absorbent powder

• Mega powerful single beam rechargeable torch with a stunning light distance – 720 metres on boost
• Blink, Position, S.O.S., Strobe and Dimming feature light options
• Patented Advanced Focus System optics for flood (near) or spot (distance) illumination
• Protective rubber on the lamp head and end cap help protect against impact and offer increased grip; lens shield protects the lens from impact, dirt and chemical damage
• Dust/Water Resistance IP54
• Run time (H) 1/2/25
• 3 x 18650 battery pack, wrist-strap, contact charging cable and mains plug with USB port (supplied)

Features
Smart Fit with Profile pattern PU palm for superior grip
Allows ultimate control of your touch screen device with built-in intelligent touch technology
Thumb patch reinforcement
Heavy stretchable spandex fabric fourchettes

Applications
Multi-Purpose
Landscaping
DIY
Material Handling
Maintenance and Repair

EN388:2003
• Level 4 - Abrasion
• Level 1 - Cut Resistance
• Level 3 - Tear Resistance
• Level 1 - Puncture

•Heavyweight PVC supported glove with excellent comfort
•Special nitrile and PVC blend formulation to provide good durability, protection and flexibility, even in low temperatures
㩁-gauge seamless cotton lining for added comfort and protection
•Foam palm providing good oil resistant as well as good grip performance in wet & oily environment
• 300mm length
•Food safe
•EN ISO 374-1:2016 Type A Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for chemical risks, JKLPMT
• EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for micro-organisms risks
•EN 388:2016 Protective gloves against mechanical risks 4131A
•Level 4- Abrasion
•Level 1- Cut Resistance
•Level 3- Tear Resistance
•Level 1- Puncture
•Level A ISO 13997 Cut Resistance

•Heavyweight PVC supported glove with excellent comfort
•Special nitrile and PVC blend formulation to provide good durability, protection and flexibility, even in low temperatures
㩁-gauge seamless cotton lining for added comfort and protection
•Foam palm providing good oil resistant as well as good grip performance in wet & oily environment
• 380mm length
•Food safe
•EN ISO 374-1:2016 Type A Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for chemical risks, JKLPMT
• EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for micro-organisms risks
•EN 388:2016 Protective gloves against mechanical risks 4131A
•Level 4- Abrasion
•Level 1- Cut Resistance
•Level 3- Tear Resistance
•Level 1- Puncture
•Level A ISO 13997 Cut Resistance

• Optimized durability: Hyflex 11-561 industrial safety gloves are 100% more durable than nearest competitors, with FORTIX Abrasion Resistance Technology

• Advanced protection: These safety gloves’ patented INTERCEPT Cut Resistance Technology guards against lacerations

• Enhanced features: The 11-561’s palm-dipped coating improves grip, while a reinforced thumb crotch defends against rapid wear

• Elevated comfort: HyFlex 11-561 industrial working gloves are also light and thin, making them flexible, yet protective

• Certified harm-free: Dermatest and Oeko-Tex certification ensures these PPE gloves are skin friendly and free of harmful substances

• Proven excellence: HyFlex 11-561 PPE gloves satisfy EN and ANSI norms for cut and abrasion resistance

• Nitrile palm coated
• Nylon, HPPE, Basalt, Spandex, Polyester Liner
• 15 Gauge
• Food safe
• EN 388:2016 Protective gloves against mechanical risks 4X42C