Gloves — Nitrile
• Knitted nylon/lycra glove
• Nitrile/water based PU palm and finger coating.
• Breathable, Soft and tactile finish
• EN388: 2016
• Level 3 - Abrasion
• Level X - Cut Resistance
• Level 3 - Tear Resistance
• Level 1 - Puncture
• Level A - ISO 13997 Cut Resistance
• 35% polyester + 65% NItrile
• 100% Polyester shell with nitrile coated palm and fingers.
• Ventilated back.
• Lightweight for maximum dexterity and comfort with sensitivity.
• Suitable for general assembly handling and light engineering.
• Ideal for dry or slightly oily applications.
• EN388: 2016
• Level 4 - Abrasion
• Level X - Cut Resistance
• Level 2 - Tear Resistance
• Level 1 - Puncture
• Level A - ISO 13997 Cut Resistance
• 35% polyester + 65% Nitrile
• Nitrile coated palm and fingers.
• Ventilated back.
• Lightweight for maximum dexterity and comfort with sensitivity.
• Suitable for general assembly handling and engineering applications
• EN388: 2016
• Level 4 - Abrasion
• Level X - Cut Resistance
• Level 2 - Tear Resistance
• Level 1 - Puncture
• Level A - ISO 13997 Cut Resistance
• Sizes S-XL comes in boxes of 100 pieces.
• Size XXL comes in boxes of 90 pieces.
• Powder Free black textured Nitrile Gloves
• CE category III
• Excellent elasticity
• Textured for added grip
• 7 mil Thick (1 mil = 1/1000 of an inch)
• Each glove weighs approx. 7 grams (based on a size large)
• EN ISO 21420: 2020
• EN 388:2016+A1:2018
• Level 0 - Abrasion Resistance
• Level X - Cut resistance (Coupe Test)
• Level 0 - Tear Resistance
• Level 0 - Puncture Resistance
• Level A - TDM Cut Resistance (ISO 13997)
• EN 374-5: 2016
Resistance to Bacteria and Fungi PASS
Resistance to Virus PASS
• EN ISO 374-1:2016+A1:2018 / TYPE B
n-Heptane(J) - More than 30 Mins (level 2).
Sodium Hydroxide 40%(K) - More than 480 Mins (level 6).
Ammonium Hydroxide 25%(O) - More than 10 Mins (level 1).
Formaldehyde 37%(T)- More than 480 Mins (level 6).
Hydrogen Peroxide 30%(P) - More than 30 Mins (level 2).
• Nitrile glove
• Flocklined
• Overall length 31.5cm
• A high level of resistance to abrasion, solvents and animal fats.
• Embossed pattern to palm
• Silicon and wax free
EN388:2016+A1:2018
• Level 4 - Abrasion Resistance
• Level 1 - Blade Cut Resistance
• Level 0 - Tear Resistance
• Level 1 - Puncture
• Level X - ISO 13997 Blade Cut Resistance
EN ISO 374-5:2016
• Level Pass - Protection against bacteria and fungi
• Level Pass - Protection against viruses
EN ISO 374-1:2016+A1:2018/TYPE A
• Level 6 - n-Heptane (J)
• Level 6 - 40% Sodium Hydroxide (K)
• Level 3 - 96% Sulphuric acid (L)
• Level 5 - 25% Ammonium Hydroxide (O)
• Level 6 - 30% Hydrogen Peroxide (P)
• Level 6 - 37% Formaldehyde (T)
ISO 18889:2019
•Level G2 Protection against liquid pesticides
• 20% polyester + 80% Nitrile
• Heavy duty nitrile fully dipped fingers and palm
• Lightweight for maximum dexterity
• The extended dipping process produces a uniformly thick coverage of nitrile; ideal for the most demanding of applications
• Liquid proof.
• Provides wearer with a combination of durability and comfort
• EN388: 2016
• Level 4 - Abrasion
• Level X - Cut Resistance
• Level 2 - Tear Resistance
• Level 1 - Puncture
• Level A - ISO 13997 Cut Resistance
• Powder Free blue textured Nitrile Gloves
• CE category III
• CE class I examination glove
• Excellent elasticity
• Suitable for applications which are visible to the public
catering, beauty and body art sectors.
• Dual labelling. Fulfilling medical requirements in the tattoo and piercing sector
• Skin friendly: free from phthalates/ softeners and allergenic latex proteins
• Tested and certified according to 1935/2004 - suitable for food contact
• AQL 1.5
Chemical - Breakthrough Time
Formaldehyde 37% (T) - More than 480 Mins (Level 6)
Sodium Hydroxide 40% (K) - More than 480 Mins (Level 6)
Hydrogen Peroxide 30% (P) - More than 30 Mins (Level 2)
• EN420: 2003 +A1:2009
• EN ISO 374-1: 2016
• EN ISO 374-5: 2016
• EN 455: 2000
• 100% Nylon seamless shell with nitrile coated palm and fingers.
• Ventilated back.
• Lightweight for maximum dexterity and comfort with sensitivity.
• Suitable for general assembly handling and light engineering.
• Ideal for dry or slightly oily applications.
• EN ISO 21420:2020
• EN388: 2016+A1:2018
• Level 4 - Abrasion
• Level X - Cut Resistance
• Level 2 - Tear Resistance
• Level 1 - Puncture
• Level A - ISO 13997 Cut Resistance
• Excellent protection for heavy duty applications.
• Soft jersey liner for wearer comfort
• Nitrile coating resists puncture cuts and abrasions.
• EN388: 2016
• Level 4 - Abrasion
• Level X - Cut Resistance
• Level 1 - Tear Resistance
• Level 1 - Puncture
• Level B - ISO 13997 Cut Resistance
• Good flexibility and comfort.
• Resists abrasion, cuts and punctures.
• General purpose handling in many industrial sectors.
• EN388: 2016
• Level 3 - Abrasion
• Level X - Cut Resistance
• Level 1 - Tear Resistance
• Level 1 - Puncture
• Level B - ISO 13997 Cut Resistance
• 100% Nylon seamless shell.
• Nitrile coated palm and fingers.
• Ventilated back.
• Lightweight for maximum dexterity and comfort with sensitivity.
• Suitable for general assembly handling and engineering applications
• EN388: 2016
• Level 3 - Abrasion
• Level X - Cut Resistance
• Level 2 - Tear Resistance
• Level 1 - Puncture
• Level A - ISO 13997 Cut Resistance
• HPPE 40.9%, Nylon 14.1%, Polyester 15.9%, Glass fibre 21.3%, Spandex 7.8% Liner.
• 100% Nitrile Rubber Coating.
• 100% PVC TPR back of hand protection.
• Lightweight for maximum dexterity and comfort with sensitivity.
• Suitable for general assembly handling and engineering applications.
• EN 388:2016+A1:2018
• Level 4 - Abrasion Resistance
• Level X - Cut resistance (Coupe Test)
• Level 4 - Tear Resistance
• Level 2 - Puncture Resistance
• Level D - TDM Cut Resistance (ISO 13997)
• Para-Aramid 71.2%, Steel 13.5%, Polyester 10.5%, Spandex 8% Liner.
• 100% Nitrile rubber coating.
• Ventilated back.
• Lightweight for maximum dexterity and comfort with sensitivity.
• Suitable for general assembly handling and engineering applications.
• EN 388:2016+A1:2018
• Level 4 - Abrasion Resistance
• Level X - Cut resistance (Coupe Test)
• Level 4 - Tear Resistance
• Level 1 - Puncture Resistance
• Level D - TDM Cut Resistance (ISO 13997)
• Nitrile Foam coating
• 15 Gauge - Nylon and Polyester
• Comfortable and breathable for prolonged periods when performing precision tasks
• EN 388: 2016
• Level 4 - Abrasion
• Level X - Cut resistance
• Level 3 - Tear resistance
• Level 1 - Puncture
• Level A - ISO 13997 Cut Resistance
• Double coated nitrile offers water and oil resistance
• Wet/dry grip
• Washable and can be tumble dried (Follow instructions)
• EN388: 2016
• Level 4 - Abrasion
• Level X - Cut Resistance
• Level 2 - Tear Resistance
• Level 1 - Puncture
• Level B - ISO 13997 Cut Resistance
• EN 511: 2006
• Level X - Convective Cold
• Level 2 - Contact Cold
• Level X - Water Penetration
• Double coated nitrile
• 13-gauge HPPE/Glass Fiber/Spandex liner
• Wet/dry grip
• Offers fantastic oil and water resistance
• Washable and can be tumble dried (follow instructions)
• EN 388: 2016
• Level 4 - Abrasion
• Level X - Cut resistance
• Level 4 - Tear resistance
• Level 3 - Puncture
• Level D - ISO 13997 Cut Resistance
• This very thin glove offers outstanding comfort, fit and sensitivity for the most delicate handling.
• 18-gauge knitting technology allows this glove to be ultra-thin yet tough.
• Designed for a wide range of lightweight applications in dry or slightly oily environments, it is ideal for workers who need a higher level of fit, touch and
• Ideal for applications where cotton gloves or no gloves at all are used despite the risk of scrapes, blisters and minor injuries.
• The dark liner Is well-suited for environments that present a certain degree of dirt.
• EN388:2003
• Level 2- Abrasion
• Level 1 - Cut Resistance
• Level 2 - Tear Resistance
• Level 1 - Puncture
Grey - Palm coated foam nitrile with a seamless knitted liner
• The original nitrile foam glove
• Highly versatile solution for precision assembly and general handling
• Perfect balance between comfort, dexterity and protection
• Advanced Knitting Technology to increase stretch and flexibility in high-stress areas
EN388
3.1.3.1
Antistatic according to EN1149
• Bare-hand -like comfort and tactility with high durability
• Ultra-thin Nitrile Foam FORTIX coating lasts up to x3 longer than comparable coatings
• 20% more breathable coating than earlier formulation, for cooler and drier hands
• Seamless 18-gauge nylon-spandex liner has a bare-hand feel, offering breathability, comfort and enhanced fingertip sensitivity for precision tasks
• Silicone free material: for no transfer of silicone containments to metal parts prior to painting
• Ideal solution for workers doing general handling or assembling tasks
•Improved durability and grip: These HyFlex gloves’ FORTIX Abrasion Resistance Technology delivers 2x more grip and ensures ANSI/EN compliant abrasion resistance (vs. previous technology version)
•Advanced ergonomics: ERGOFORM Ergonomic Design Technology ensures a fit shaped to natural hand contours
•Elevated comfort: HyFlex 11-840 safety gloves’ ZONZ Comfort Fit Technology relieves tension,
for optimal comfort
•Guaranteed skin-friendliness and cleanliness: HyFlex 11-840 PPE gloves benefit from Dermatest certification and an impurity-extracting proprietary washing process
•Reduced contaminants: Silicone-free, they prevent contaminant transfer to metal before painting
•Certified harm-free: They are also Oeko-Tex -approved, certifying them free of substances
harmful to human health
• Foam nitrile palm coated
• Nylon Spandex Liner
• 15 gauge
•Food safe
• Silicone free material: for no transfer of silicone containments to metal parts prior to painting
• EN 388:2016 Protective gloves against mechanical risks 4131A
• EN 407 Protective gloves against thermal risks X1XXXX
•Heightened defences: HyFlex 11-849 safety gloves’ fully dipped design ensures 360° protection from light scratches and dirt
•Improved durability: Their FORTIX Abrasion Resistance nitrile foam coating guarantees ANSI/EN-compliant abrasion resistance
•Enhanced grip: HyFlex 11-849 safety gloves come with 2x more grip, for better performance in dry or slightly oily conditions
•Reduced contaminants: HyFlex 11-849 industrial working gloves are silicone-free, avoiding contaminant transfer to metal before painting
•Certified harm-free: Dermatest and Oeko-Tex certification ensure these PPE gloves are skin friendly and free of harmful substances
•Elevated comfort: These HyFlex gloves’ Spandex and nylon liner is shaped to natural hand
contours
• Foam nitrile palm coated
•Fully coated nitrile
• Nylon Spandex Liner
• 18 gauge
•Food safe
• Silicone free material: for no transfer of silicone containments to metal parts prior to painting
• EN 388:2016 Protective gloves against mechanical risks 4121A
• EN 407 Protective gloves against thermal risks X1XXXX
• High-comfort nitrile chemical resistant glove for a wide range of applications, covering to the top of the elbow
• High performance nitrile compound provides an outstanding combination of chemical resistance and strength, for optimal results in wet or dry work environments
• High levels of flexibility, comfort, and dexterity
• Suitable for heavy-duty cleaning applications
• No inner cotton flocking, reducing risk of lint contamination and making it ideal for production areas sensitive to the introduction of external impurities
• Sand patch finish giving the glove a smooth surface that decreases
• Indirect costs, thanks to fewer rejects of fragile parts
• Fully reusable, with an unequalled abrasion resistance
• 18 (457mm) length
• Acceptable quality level (AQL): 0.65
• EN ISO 374-1:2016 Type A Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for chemical risks, AGJKLPT
• EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for micro-organisms risks
• ISO 18889:2019 Protective gloves for pesticide operators and re-entry workers. Performance requirements
• Food safe
• EN 388:2016 Protective gloves against mechanical risks 4102X
• Level 4- Abrasion
• Level 1- Cut Resistance
• Level 0- Tear Resistance
• Level 2- Puncture
• Level X- ISO 13997 Cut Resitance
• Lightweight reusable, nitrile gloves designed specifically for food processing and handling
• Improved grip with diamond pattern surfacing for unmatched grip in wet and oily conditions
• Outstanding flexibility and dexterity, even at low temperatures
• Liquid-proof VersaTouch can be used on their own or as outer gloves over thermal liners or cut resistant gloves
• Latex-free formulation presents no risk of Type 1 allergies
• These food-processing gloves offer an engineered fit to allow an optimum balance of fit and flexibility both on its own or as an over glove
• 8mil/0.2mm thickness allows dexterity and tactility without a loss of durability
• Nitrile Rubber (NBR) offering protection against light acids, greases, oils and liquids
• The latex-free formulation of these meat-processing gloves presents no risk of Type 1 allergies
• Reverse lozenge grip design
• Unflocked to prevent the risk of food contamination
• Long cuff extends to the forearm
• 12.2 “(310mm) Length
• Green, 37-300 and Yellow, 37-320 Variants available upon request
• EN ISO 374-1:2016 Type A Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for chemical risks, JKT
• EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for micro-organisms risks
• EN 421 Protective gloves against ionizing radiation and radioactive contamination
• ISO 18889:2019 Protective gloves for pesticide operators and re-entry workers. Performance requirements
• EN 388:2016 Protective gloves against mechanical risks 2001X
• Abrasion- Level 2
• Cut Resistance- X
• Tear- 0
• Puncture- Level 1
