Gloves — Leather
-
-
High quality soft grain leather.
knitted cotton back.
Hook and loop cuff fastening.
EN388: 2016
Level 3 - Abrasion
Level X - Cut Resistance
Level 2 - Tear Resistance
Level 1 - Puncture
Level A - ISO 13997 Cut Resistance Full grain soft cowhide leather
Gun pattern design.
Elasticated cuff with integral vein patch
Fully cotton fleece lined
Robust hard wearing, multi purpose glove ideal for low
temperature working.
GLOVE IS SIZE L/9
EN388: 2003
Level 2 - Abrasion
Level 1 - Cut Resistance
Level 4 - Tear Resistance
Level 3 - Puncture Soft grain leather.
Gun pattern design.
Half elastication to back of cuff.
Fleece lined.
Colour co-ordinated sized cuffs
L - Green Cuff
XL - Blue Cuff
EN388: 2016
Level 3 - Abrasion
Level X - Cut Resistance
Level 4 - Tear Resistance
Level 4 - Puncture
Level B - ISO 13997 Cut Resistance Soft grain leather.
Gun pattern design.
Half elastication to back of cuff.
Fleece lined.
Colour co-ordinated sized cuffs
L - Green Cuff
XL - Blue Cuff
EN388: 2016
Level 3 - Abrasion
Level X - Cut Resistance
Level 4 - Tear Resistance
Level 4 - Puncture
Level B - ISO 13997 Cut Resistance Soft grain leather.
Gun pattern design.
Half elastication to back of cuff.
Colour co-ordinated sized cuffs
L - Green Cuff
XL - Blue Cuff
EN388: 2016
Level 3 - Abrasion
Level X - Cut Resistance
Level 4 - Tear Resistance
Level 4 - Puncture
Level B - ISO 13997 Cut Resistance Premium Cowhide Split Leather
G-150gram Thinsulate and Micro Fleece
Nylon Cuff
EN 388:2016+A1:2018
Level 4 - Abrasion Resistance
Level X - Cut resistance (Coupe Test)
Level 3 - Tear Resistance
Level 4 - Puncture Resistance
Level B - TDM Cut Resistance (ISO 13997)
EN 511:2006
Level 1 - Convective Cold Resistance
Level 3 - Contact Cold Resistance
Level X - Water Penetration Premium goatskin Leather with reinforced stitching
Reinforced Para-aramid Lining
TPR back of hand protection
ARC Flash resistant ASTM F2675/F2675M 55cal/cm2
ARC Flash Heat attenuation factor 97.1%
EN 388:2016+A1:2018
Level 3 - Abrasion Resistance
Level X - Cut resistance (Coupe Test)
Level 4 - Tear Resistance
Level 3 - Puncture Resistance
Level E - TDM Cut Resistance (ISO 13997)
Level P - Impact Resistance
EN 407:2004
Level X - Burning Behaviour
Level 1 - Contact Heat
Level X - Convective heat
Level X - Radiant heat
Level X - Small splashes of Molten Metal
Level X - Large splashes of Molten Metal ANSI S2.73-2014/ISO 10819:2013-certified vibration protection
Full-length AVC palm padding reduces vibration and palm impact
Gripping palm provides secure hold on tools and equipment
Neoprene knuckle pad
Reinforced fingertips and thumb saddle
Low-profile molded hook & loop closure with ID space to write wearer's name
EN 388: 2121 X
PatentedLeather Protection Gauntlet which can be worn over the top of the 'Electrician Gauntlet Glove' to provide mechanical protection.
Only to be used with the ELG09 and ELG10
EN420:2003
EN388:2016 / 3111X
OTHER SIZES AVAILABLE 8, 9, 10 & 11-
9 Products
-
With over 20,000 products in stock at our warehouse, our team are here to help & find you the right product.