AlphaTec® 58-005 is an evolution in chemical glove protection whilst making advancements in ergonomics to ensure exceptional fit, feel and tactility. Providing incredible durability and versality alongside a supported nylon liner for comfort, the AlphaTec® 58-005 is the perfect chemical glove for acids, hydrocarbons, fats, oils amongst many others.

• Unique Nitrile/Neoprene blend provides enhanced chemical permeation and degradation resistance
• Ansell Grip Technology for the handling of wet or oily parts providing enhanced dexterity, grip and comfort
• Optimized fit that integrates the nylon liner into the nitrile and neoprene shell for better dexterity & tactility versus double gloving
• Cuff can be folded to act as a gutter to prevent chemicals running down the arm
• 13.8” (350mm) length
• EN 407 Protective gloves against thermal risks X1XXXX
• EN ISO 374-1:2016 Type A Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for chemical risks, AJKLMNOPT
• EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for micro-organisms risks
• EN 388:2016 Protective gloves against mechanical risks 4122A
• Level 4- Abrasion
• Level 1- Cut Resistance
• Level 2- Tear Resistance
• Level 2- Puncture
• Level A- ISO 13997 Cut Resistance

AlphaTec® 58-008 delivers chemical protection with the advantage of extended length protection covering the full arm. Designed for applications with a high splash risk or full immersion. AlphaTec® 58-008’s full length is 100% nitrile, offering the same protection at the fingertip to the end of the cuff

• Nitrile polymer for excellent mechanical protection as well as resistance to oils, fats, greases and hydrocarbons
• Lozenge grip for enhance grip in dry and wet conditions
• Optimized fit that integrates the nylon liner into the nitrile and neoprene shell for better dexterity & tactility versus double gloving
• Excellent dry & wet grip enhance dexterity and reduce hand fatigue
• Wide cuff to allow donning over protection clothing
• 25.2” (640mm) length
• Food safe
• EN ISO 374-1:2016 Type A Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for chemical risks, AJKLOT
• EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for micro-organisms risks
• EN 388:2016 Protective gloves against mechanical risks 4102X
• Level 4- Abrasion
• Level 1- Cut Resistance
• Level 0- Tear Resistance
• Level 2- Puncture
• Level X- ISO 13997 Cut Resistance

• Enhanced grip: Thanks to their ANSELL GRIP coating, AlphaTec 58-535W safety gloves
minimize the force required to handle oily or wet components

• Elevated comfort: Their white nylon inner liner enhances comfort and helps make them perfect for indoor applications

• Advanced defences: AlphaTec 58-535W work gloves’ bonded construction, featuring a coating polymer that doesn’t penetrate the liner in manufacture, limits liquid and chemical leakage

• Improved durability: They also boast ANSI/EN compliant abrasion resistance

• Specialized protection: Beyond chemical resistance, they satisfy EN 407 contact heat level 1, further enhancing workplace safety

• Nitrile glove with nylon white liner
• 13.4” (340mm) length
• EN 407 Protective gloves against thermal risks X1XXXX
• EN ISO 374-1:2016 Type A Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for chemical risks, AJKLOPT
• EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for micro-organisms risks
• Food safe
• EN 388:2016 Protective gloves against mechanical risks 3132A
• Level 3 Abrasion
• Level 1- Cut Resistance
• Level 3- Tear Resistance
• Level 2- Puncture
• Level A- ISO 13997 Cut Resistance

• Lightweight nylon
• PVC coating to the inside
• Elasticated waist
• Access to side pockets
• Stud fastening to ankles
• Fully taped seams

• Lightweight nylon
• PVC coating to the inside
• Elasticated waist
• Access to side pockets
• Stud fastening to ankles
• Fully taped seams

• TR90 lightweight full rectangle Frame
• Grey/blue
• Polycarbonate lens for resistance and optical clarity
• Embedded ProBlu 420 technology
• Technology in the core of the lens
• Nylon/PC curved frame
• This unisex and bold frame comes with PrB lenses absorbing 80% of harmful bluelight at 445nm
• Supplied with hard case, microfibre cloth, user instruction
• Lens marking 2C-1.2 1 F
• Frame marking EN166 F

• Wrap around single lens.
• Nylon frame.
• Polycarbonate lens.
• Adjustable side arms.
• Presented in attractive clear package.
• Includes neck cord and carry case.

• Conform to EN166:
• Optical Class:1
• F - (Low impact energy)
• 2-1.2 - UV Filter

• Nylon Glove.
• Polyurethane palm coated.
• Machine Knitted.
• Integral elasticated wrist.
• Ideal for handling light components.

• EN388: 2003
• Level 4 - Abrasion
• Level 1 - Cut Resistance
• Level 3 - Tear Resistance
• Level 1 - Puncture

• High engineered nylon/Spandex yarn glove.
• Seamless liner.
• PU coating, palm coated.
• High quality cut resistance.
• Excellent dexterity.

• EN388: 2003
• Level 4 - Abrasion
• Level X - Cut Resistance (Glove blunted the blade, ISO 13997 test required)
• Level 4 - Tear Resistance
• Level 3 - Puncture
• Level C - ISO 13997 Cut Resistance

• 100% Nylon seamless shell.
• Nitrile coated palm and fingers.
• Ventilated back.
• Lightweight for maximum dexterity and comfort with sensitivity.
• Suitable for general assembly handling and engineering applications

• EN388: 2016
• Level 3 - Abrasion
• Level X - Cut Resistance
• Level 2 - Tear Resistance
• Level 1 - Puncture
• Level A - ISO 13997 Cut Resistance

• High performance anti-vibration gloves
• Nylon/cotton knit with natural vulcanised palm and fingertips

• Abrasion resistance level 4
• Cut resistance level 1
• Tear resistance level 4
• Puncture resistance level 2

EN420.
EN388 4.1.4.2.
EN10819:

A general purpose HDPE safety helmet with a unique rear flash in high visibility yellow or orange for added wearer security
• 6 point Nylon Textile cradle
• Brushed Nylon sweatband
• Ventilation as standard
• Approved to EN 397, EN50365

• A general purpose HDPE safety helmet with a unique rear flash in high visibility yellow or orange for added wearer security
• 6 point Nylon Textile cradle
• Brushed Nylon sweatband
• Ventilation as standard
• Approved to EN 397, EN50365

• A general purpose HDPE safety helmet with a unique rear flash in high vis orange
• 6 point Nylon Textile cradle
• Brushed Nylon sweatband
• Ventilation as standard
• Approved to EN 397, EN50365

• A general purpose HDPE safety helmet with a unique rear flash in silver
• 6 point Nylon Textile cradle
• Brushed Nylon sweatband
• Ventilation as standard
• Approved to EN 397, EN50365

• A general purpose HDPE safety helmet with a unique rear flash in high vis orange
• 6 point Nylon Textile cradle
• Brushed Nylon sweatband
• Ventilation as standard
• Approved to EN 397, EN50365

• A general purpose HDPE safety helmet with a unique rear flash in high vis yellow
• 6 point Nylon Textile cradle
• Brushed Nylon sweatband
• Ventilation as standard
• Approved to EN 397, EN50365

Reflex Black Slip Ratchet Helmet with Silver Flash

• A general purpose HDPE safety helmet with a unique rear flash in silver
• 6 point Nylon Textile cradle
• Brushed Nylon sweatband
• Ventilation as standard
• Approved to EN 397, EN50365

• A general purpose HDPE safety helmet with a unique rear flash in high visibility yellow or orange for added wearer security
• 6 point Nylon Textile cradle
• Brushed Nylon sweatband
• Ventilation as standard
• Approved to EN 397, EN50365

• A general purpose HDPE safety helmet with a unique rear flash in high visibility yellow or orange for added wearer security
• 6 point Nylon Textile cradle
• Brushed Nylon sweatband
• Ventilation as standard
• Approved to EN 397, EN50365

• A general purpose HDPE safety helmet with a unique rear flash in high visibility yellow or orange for added wearer security
• 6 point Nylon Textile cradle
• Brushed Nylon sweatband
• Ventilation as standard
• Approved to EN 397, EN50365

• Brushed nylon sweatband for improved comfort
• To Fit 1125, Reflex and Vulcan helmets
• 2mm thick foam layer

• The Browguard system allows you to fit general purpose Face Screens or Chinguard Face Screens when a safety helmet is not required
• Nylon
• Attaches quickly and easily to Face Screens or Chinguards
• Slip Ratchet
MUST BE WORN WITH APPROPRIATE FACE SHIELD IN ORDER TO ACHIEVE PROTECTION

• 1000D nylon with water-resistant backing
• Hook and Loop straps secure power tool battery
• Nickel-plated belt clip
• Zinc-plated cast D-Ring