• 80% cotton, 20% polyester, 320gsm
• Heavyweight, cotton rich fabric
• Cordura® fabric elbow patches for durability
• Two side pockets with YKK zips
• Thumb grips sewn into cuffs
• Distressed JCB branding across front chest

• 80% cotton, 20% polyester 320gsm
• Heavyweight cotton rich fabric
• Contrast panelling
• Thumb grips sewn into cuffs
• Kangaroo pouch front pocket
• Distressed JCB logo on chest
• JCB branding

• 80% cotton, 20% polyester 320gsm
• Heavyweight cotton rich fabric
• Contrast panelling
• Thumb grips sewn into cuffs
• Reverse zip seam pocket
• Distressed JCB logo on chest
• JCB branding

• 80% cotton, 20% polyester 320gsm
• Heavyweight cotton rich fabric
• Contrast panelling
• Thumb grips sewn into cuffs
• Kangaroo pouch front pocket
• Distressed JCB logo on chest
• JCB branding

• 80% cotton, 20% polyester, 320gsm
• Cordura® fabric elbow patches for durability
• High neck hood with lining & bungee cord adjuster
• YKK nylon concealed front full zip
• Chest pocket with YKK nylon concealed zip
• Distressed JCB logo on chest pocket
• Thumb grips sewn into cuffs
• JCB branding

• 100% Waterproof PVC upper
• Padded in-sock
• Antistatic
• Steel toecap and midsole
• Boot release tab on heel
• PVC/Nitrile sole
• Ladder grip on sole
• Wide fitting
• SRC slip resistant
• EN ISO 20345:2011 S5 SRC

• Recessed blade reduces cut injuries and damaged goods
• Cuts boxes, film, tape, and thousands more applications
• Ergonomic ‘Soft Touch’ handle reduces hand fatigue and stress
• Metal Tape Splitter
• Soft grip handle
• Highest Safety Level
• Interchangeable, replaceable head
• 1 Head Supplied, Replacement heads available separately

• Intrinsically safe LED headlamp suitable for Zones 0/20
• Patented Advanced Focus System optics for spot (near) or flood (distance) illumination
• Magnetic switch for easier operation - even with gloves on
• Direct the light within a 55° angle
• Rear red safety light acts as a positional marker to locate wearer
• Detachable, washable headband with a rubberised back for better grip
• Batteries easily changed without the need for any special tools or allen key
• IP66 dust/water resistance
• II 1G Ex ia op is IIC T4 Ga
• II 1D Ex ia op is IIIC T135°C Da
• 3 x AA (supplied)
• 7-year with registration warranty for complete peace of mind
• 50 lumen low light beam can be selected which will provide a 50 hour max run time

• Natural rubber coated, textile supported. Comfort and safety when gripping heavy, rough or slippery objects in highly aggressive environments
• Suitable for long-term wear, due to the comfort of a textile support
• Good thermal insulation
• Optimised service life: high resistance to abrasion
• 1.35mm thickness, 320mm length
• Reinforced grip and scalloped cuff
• EN 388:2016 Protective gloves against mechanical risks 3141X
• EN ISO 374-1:2016 Type B Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for chemical risks, KPT
• EN 407 Protective gloves against thermal risks X1XXXX

Key applications include:

• Fishing
• Fish-handling
• Oyster farming
• Work with frozen products

• Neoprene fabric supported gauntlet, effective thermal insulation and chemical protection
• Multi-purpose chemical resistance (acids, aliphatic solvents) increased by the thickness of the material
• Excellent thermal insulation, due to double-knit cotton
• Good grip of wet or slippery objects, due to embossed texture
• Knitted thermal protection interior
• Pebbled exterior finish
• EN 388:2016 Protective gloves against mechanical risks 2212X
• EN ISO 374-1:2016 Type A Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for chemical risks, ACLMNS
• EN 407 Protective gloves against thermal risks X2XXXX
• EN 511 Protective gloves against cold 111

Key applications include:

• Petrochemical industry - Sampling of hot petrochemical products
• Rubber industry -Polymer extrusion
• Mechanical industry- Chemical treatment of metals & oil quenching of steel
• Steam cleaning
• Road works in cold conditions
• Manufacture of insulating electric wires
• Boiler room work
• Manufacture of adhesives
• Handling of moulds in the ceramic industry
• Handling of hot piping

• PVC coated fabric supported. Comfort, flexibility, mechanical protection with grip and chemical protection
• Exceptional comfort and good resistance to cold, due to the seamless cotton-knit
• Good resistance to oils, greases and hydrocarbons
• Suitable for food contact
• 1.35mm thickness, 300mm length
• Exterior pebbled finish and scalloped cuff
• EN 388:2016 Protective gloves against mechanical risks 4121 3141X
• EN ISO 374-1:2016 Type A Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for chemical risks, KLMNPT
• EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for micro-organisms risks

Key applications include:

• Pharmaceutical industry: maintenance and cleaning
• Maintenance in wet environments
• Mechanical industry: Maintenance in wet environments (water, oil, greases, hydrocarbons)

• Nitrile coated, combined long lasting cut, thermal and chemical protection
• Textile support Mapa Technology
• Total hand protection
• Level D protection against cuts
• Entirely liquid proof, withstanding mechanical aggression
• Proven long-lasting performance
• Good grip for picking up wet and slippery objects safely
• 320mm length
• EN 388:2016 Protective gloves against mechanical risks 4X43D
• EN ISO 374-1:2016 Type B Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for chemical risks, JKOPT
• EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for micro-organisms risks
• EN 407 Protective gloves against thermal risks X1XXXX

Key applications include:

Automotive/mechanical industry
• Sheet metal
• Metal rolling, stamping and assembly
• Cutting aluminium strips
Other industries -Collection and sorting of industrial and household waste

Liquidproof glove, embedding antimicrobial Pylote's technology, that limits cross contamination by viruses & bacteria.
• 405 Activated provides a protective shield against viruses and common aggressive chemicals
• Surface protection: destruction of 99% viruses (ISO 21702:2019) & 99.99% bacteria (JIS Z 2801 standard)
• Antimicrobial action lasts for the expected lifetime of the glove
• Good grip due to the non-slip embossing
• Reduced thickness offering Tactile Sensitivity (0.7mm)
• Cotton flocking provides added comfort and perspiration absorption
• Produced using polychloroprene and natural latex
• 330mm length
• EN 388:2016 Protective gloves against mechanical risks 2110X
• EN ISO 374-1:2016 Type B Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for chemical risks, KMT
• EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for micro-organisms risks
• EN 421 Protective gloves against ionizing radiation and radioactive contamination

• Comfort, suppleness and high dexterity without any compromise on breathability and durability
• Comfort: high suppleness and flexibility, dexterity at fingertips, proven breathability
• Resistance: Extended use guaranteed by our exclusive process ResiComfort, coating provides resistance to friction
• Washable: 1 time at 40°C
• STANDARD 100 by OEKO-TEX® / Dermatological certification / Silicon Free / DMF free
• Nitrile foam sandy palm
• Interior seamless textile support finish
• Reinforced grip exterior finish
• EN 388:2016 Protective gloves against mechanical risks 4121A
• EN 407 Protective gloves against thermal risks X1XXXX

Key applications include:

Automotive/mechanical industry
• Assembly of small parts
• Automotive assembly
• Fitting small screws and fasteners
• Precision assembly
• Precision mechanical work
• Mechanical maintenance

Other industries
• Packaging
• Warehousing and receipt of goods

• Natural rubber coated high protection for handling heavy or sharp objects in wet environments
• High protection level D against cuts
• Thermal insulation of the hand
• Good grip for picking up heavy parts safely, due to embossed texture
• Good puncture-resistance
• EN 388:2016 Protective gloves against mechanical risks 3X43D
• EN 407 Protective gloves against thermal risks X2XXXX

Key applications:

Ceramic and plastics industry:
• Post-injection handling of hot plastic parts
• Handling of composite materials after heat processing

Construction Industry (Carpenters/Joiners)
Cutting wood
• Installing steel structures
• Assembly
• Screwing
• Studwork

• Local Authorities (Waste Collection and Processing) -Processing waste at a sorting centre
• Glass industry -Handling glass sheets

Features
• Form-fitting glove with reinforced palm patch and finger tips
• Durable synthetic leather base palm
• Original synthetic leather vintage puller
• PVC grip crotch
• Contrast yellow colour fourchetes and binding
• Cat 2

Applications
• Multi-purpose
• Landscaping
• Forestry Lumberyards
• Cable and Wire work
• Maintenance and Repair
• Material Handling

EN388:2003
• Level 3 - Abrasion
• Level 2 - Cut Resistance
• Level 4 - Tear Resistance
• Level 1 - Puncture

Features
• Form-fitting glove with reinforced palm patch and finger tips
• Durable synthetic leather base palm
• Original synthetic leather vintage puller
• PVC grip crotch
• Contrast yellow colour fourchetes and binding
• 3-Cut finger glove

Applications
• Multi-purpose
• Landscaping
• Forestry Lumberyards
• Cable and Wire work
• Maintenance and Repair
• Material Handling

EN388:2003
• Level 3 - Abrasion
• Level 2 - Cut Resistance
• Level 4 - Tear Resistance
• Level 1 - Puncture

Features
• Durable black Meshed Fabric
• Synthetic leather Nails Pinch Protection with maximum dexterity
• Heavy Spandex fabric on Fourchettes
• Yellow piping on Knuckle lower line for durability

Applications
• Multi-Purpose
• Heavy Assembling
• Power Tool Handling
• Maintenance and Repair
• Box handling and Glass handling
• Engineering Equipment Operations
• Transportation
• Industrial Grip Work

EN388:2003
• Level 3 - Abrasion
• Level 1 - Cut Resistance
• Level 2 - Tear Resistance
• Level 1 - Puncture

Features
Rubber Bumpers knuckle protection
Hi-Viz back hand finger tips
PU serino grip palm patching
Terry towel thumb back
Stitched vinyl TPR puller on front cuff
Easy slip fit style
Water barrier inside

Applications
Multi-Purpose
Commercial Constructions
Goods Installations
Cold Weather
Safety Law Enforcement
Cold Storage

EN388:2003
• Level 3 - Abrasion
• Level 2 - Cut Resistance
• Level 4 - Tear Resistance
• Level 2 - Puncture
EN511 1 4 1

Form-fitting TrekDry® material keeps working hands cool and comfortable.
Adjustable Wide-Fit™ closure provides a secure fit.
Textured Armortex® provides enhanced gripping power in dry, oily and wet conditions.
Pinched fingertip construction improves fingertip strength and durability.
Machine washable.

15-gauge CoolMax® fabric technology provides evaporative cooling.
Foam latex palm coating and textured grip provide gripping power in dry, wet, and oily conditions.
Machine washable.

Comfortable 15-gauge knit nylon construction protects against skin abrasions.
Compression cuff provides a secure fit.
Water-based urethane palm coating is extremely tactile and offers good grip performance in dry or wet working conditions.
Touchscreen capable to keep users safe and connected.
REACH Compliant.
Silicone free and DMF free.
OEKO-TEX® Standard 100 Compliant Textiles.
Machine washable and dryable.

High-visibility 15-gauge nylon shell provides eye-catching luminance.
Oil-resistant micro foam coated grip provides gripping power in slick conditions.
Machine washable.

High dexterity 18-gauge HPPE + steel knit construction protects against skin abrasions and lacerations.
Comfortable compression cuffs provide a secure fit.
Water-based urethane palm coating is extremely tactile and offers good grip performance in dry or wet working conditions.
Cut performance meets ANSI A4 cut-resistant glove standard.
Touchscreen capable to keep users safe and connected.
Silicone free.
REACH Compliant
OEKO-TEX® Standard 100 Compliant Textiles
Machine washable and dryable.