• Lightweight reusable, nitrile gloves designed specifically for food processing and handling
• Improved grip with diamond pattern surfacing for unmatched grip in wet and oily conditions
• Outstanding flexibility and dexterity, even at low temperatures
• Liquid-proof VersaTouch can be used on their own or as outer gloves over thermal liners or cut resistant gloves
• Latex-free formulation presents no risk of Type 1 allergies

• Lightweight reusable, nitrile gloves designed specifically for food processing and handling
• Improved grip with diamond pattern surfacing for unmatched grip in wet and oily conditions
• Outstanding flexibility and dexterity, even at low temperatures
• Liquid-proof VersaTouch can be used on their own or as outer gloves over thermal liners or cut resistant gloves
• Latex-free formulation presents no risk of Type 1 allergies

• These food-processing gloves offer an engineered fit to allow an optimum balance of fit and flexibility both on its own or as an over glove
• 8mil/0.2mm thickness allows dexterity and tactility without a loss of durability
• Nitrile Rubber (NBR) offering protection against light acids, greases, oils and liquids
• The latex-free formulation of these meat-processing gloves presents no risk of Type 1 allergies
• Reverse lozenge grip design
• Unflocked to prevent the risk of food contamination
• Long cuff extends to the forearm
• 12.2 “(310mm) Length
• Green, 37-300 and Yellow, 37-320 Variants available upon request
• EN ISO 374-1:2016 Type A Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for chemical risks, JKT
• EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for micro-organisms risks
• EN 421 Protective gloves against ionizing radiation and radioactive contamination
• ISO 18889:2019 Protective gloves for pesticide operators and re-entry workers. Performance requirements
• EN 388:2016 Protective gloves against mechanical risks 2001X
• Abrasion- Level 2
• Cut Resistance- X
• Tear- 0
• Puncture- Level 1

• High comfort, chemical resistant glove for safe handling in a wide range of work environments where harsh chemicals are present
• Cotton flock liner to the glove with nitrile film, to offer exceptional comfort to the wearer
• Unequalled abrasion resistance
• Reversed lozenge finish to enhance levels of grip
• Sand patch finish for a smooth surface
• Length 330mm and thickness 0.38mm

• Great protection and comfort in moderate heat
• Designed for intermittent handling of hot objects up to 180 deg C
• Provides high resistance to cuts, minor injuries and abrasion
• Enhances grip on dry and oily surfaces
• Comfortable and flexible, sweat absorbent non-woven felt inner

Chemical-resistant glove with a unique multi-layer design for broader protection

•Maximized protection: AlphaTec 53-001 safety gloves’ MICROCHEM multi-layer nitrile and neoprene protective barrier ensures EN 374 type A chemical defences and protection from acids and hydrocarbons

•Enhanced grip: ANSELL GRIP coating offers secure grip for wet or oily components

•Elevated comfort: AlphaTec 53-001 chemical gloves’ soft nylon inner liner grants them a comfortable feel

•Considered aesthetics: Their black cuff design makes them perfect for dirt-prone outdoor application

•Certified skin-friendly and harm-free: Oeko-Tex certification ensures they contain no substances harmful to human health

• Improved durability: AlphaTec 53-001 industrial gloves’ multi-layer coating is also abrasion resistant, achieving EN and ANSI level 3 abrasion resistance

• 350mm length
•EN 407 Protective gloves against thermal risks X1XXXX
•EN ISO 374-1:2016 Type A Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for chemical risks, ACFGJKLMNOPST
• EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for micro-organisms risks
•EN 388:2016 Protective gloves against mechanical risks 3121A
•Level 3- Abrasion
•Level 1- Cut Resistance
•Level 2- Tear Resistance
•Level 1- Puncture
•Level A- ISO 13997 Cut Resistance

The ideal solution to mitigate static build up when working with chemicals and liquids in environments with static hazards or high explosive risks

•Nitrile barrier provides advanced chemical protection from many frequently used chemicals.
•Unique Nitrile composition which allows effective dissipation of static build up. Vertical resistance <1x10⁸
•High performance Nitrile compound offers a far superior snag, puncture and abrasion protection compared with rubber or Neoprene gloves
•Reverse lozenge palm finish for improved dry/wet grip
•Foldable cuff gutter to prevent dripping on the forearm
•Antistatic flocking layer for ease of donning/doffing and moisture management
• 330mm length
•EN 16350:2014 Protective gloves. Electrostatic properties
•EN ISO 374-1:2016 Type A Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for chemical risks, AJKLOPT
• EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for micro-organisms risks
•EN 388:2016 Protective gloves against mechanical risks 4101X
•Level 4- Abrasion
• Level 1- Cut Resistance
• Level 0- Tear Resistance
• Level 1- Puncture
•Level X- ISO 13997 Cut Resistance

AlphaTec® 58-005 is an evolution in chemical glove protection whilst making advancements in ergonomics to ensure exceptional fit, feel and tactility. Providing incredible durability and versality alongside a supported nylon liner for comfort, the AlphaTec® 58-005 is the perfect chemical glove for acids, hydrocarbons, fats, oils amongst many others.

• Unique Nitrile/Neoprene blend provides enhanced chemical permeation and degradation resistance
• Ansell Grip Technology for the handling of wet or oily parts providing enhanced dexterity, grip and comfort
• Optimized fit that integrates the nylon liner into the nitrile and neoprene shell for better dexterity & tactility versus double gloving
• Cuff can be folded to act as a gutter to prevent chemicals running down the arm
• 13.8” (350mm) length
• EN 407 Protective gloves against thermal risks X1XXXX
• EN ISO 374-1:2016 Type A Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for chemical risks, AJKLMNOPT
• EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for micro-organisms risks
• EN 388:2016 Protective gloves against mechanical risks 4122A
• Level 4- Abrasion
• Level 1- Cut Resistance
• Level 2- Tear Resistance
• Level 2- Puncture
• Level A- ISO 13997 Cut Resistance

AlphaTec® 58-008 delivers chemical protection with the advantage of extended length protection covering the full arm. Designed for applications with a high splash risk or full immersion. AlphaTec® 58-008’s full length is 100% nitrile, offering the same protection at the fingertip to the end of the cuff

• Nitrile polymer for excellent mechanical protection as well as resistance to oils, fats, greases and hydrocarbons
• Lozenge grip for enhance grip in dry and wet conditions
• Optimized fit that integrates the nylon liner into the nitrile and neoprene shell for better dexterity & tactility versus double gloving
• Excellent dry & wet grip enhance dexterity and reduce hand fatigue
• Wide cuff to allow donning over protection clothing
• 25.2” (640mm) length
• Food safe
• EN ISO 374-1:2016 Type A Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for chemical risks, AJKLOT
• EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for micro-organisms risks
• EN 388:2016 Protective gloves against mechanical risks 4102X
• Level 4- Abrasion
• Level 1- Cut Resistance
• Level 0- Tear Resistance
• Level 2- Puncture
• Level X- ISO 13997 Cut Resistance

• AlphaTec AQUADRI gloves are engineered with a unique moisture management technology that keeps hands dryer, for significantly longer periods of time.
• The design features a two-layered coating construction with a superior nitrile film for advanced chemical protection and an inner soft foam coating, making a difference especially when sweaty hands are a problem, resulting in an improved user comfort and performance.
•Patented AQUADRI technology brings a unique performance in moisture management that significantly reduces sweat build up inside the glove under hot & humid environments.
•High performance nitrile compound offers a far superior snag, puncture and abrasion protection compared with rubber or neoprene gloves
•Reverse lozenge palm finish for improved dry/wet grip
•Foldable cuff gutter to prevent dripping on the forearm
• 320mm length
•Food safe
•EN ISO 374-1:2016 Type A Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for chemical risks, JKLOPT
• EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for micro-organisms risks
•EN 388:2016 Protective gloves against mechanical risks 3101X
•Level 3- Abrasion
•Level 1- Cut Resistance
•Level 0- Tear Resistance
•Level 1- Puncture
•Level X ISO 13997 Cut Resistance

• AlphaTec AQUADRI gloves are engineered with a unique moisture management technology that keeps hands dryer, for significantly longer periods of time.
• The design features a two-layered coating construction with a superior nitrile film for advanced chemical protection and an inner soft foam coating, making a difference especially when sweaty hands are a problem, resulting in an improved user comfort and performance.
•Patented AQUADRI technology brings a unique performance in moisture management that significantly reduces sweat build up inside the glove under hot & humid environments.
•High performance nitrile compound offers a far superior snag, puncture and abrasion protection compared with rubber or neoprene gloves
•Reverse lozenge palm finish for improved dry/wet grip
•Foldable cuff gutter to prevent dripping on the forearm
•Longer version than the 58-330 for further protection
• 380mm length
•Food safe
•EN ISO 374-1:2016 Type A Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for chemical risks, JKLOPT
• EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for micro-organisms risks
•EN 388:2016 Protective gloves against mechanical risks 4101X
•Level 4- Abrasion
•Level 1- Cut Resistance
•Level 0- Tear Resistance
•Level 1- Puncture
•Level X ISO 13997 Cut Resistance

• Medium duty with a 10-mil shell to protect against exposure to bases, oils, fuels, some solvents, grasses and animal fats
• Featuring ANSELL GRIP technology for optimal control when handling oily or wet items
• Less force is required on slippery objects, reducing hand and arm fatigue
• Nitrile coating offers superior snag, puncture and abrasion protection for long term wearer
• Length 300mm

• Enhanced grip: Thanks to their ANSELL GRIP coating, AlphaTec 58-535B safety gloves minimize the force required to handle oily or wet components

• Elevated comfort: Their black acrylic inner liner improves comfort and facilitates outdoor application

• Advanced defences: AlphaTec 58-535B work gloves’ bonded construction, featuring a coating polymer that doesn’t penetrate the liner in manufacture, limits liquid and chemical leakage

• Improved durability: They also boast ANSI/EN compliant abrasion resistance

• Specialized protection: Beyond chemical resistance, they satisfy EN 407 contact heat level 1, further enhancing workplace safety

• Augmented dexterity: AlphaTec 58-535B PPE gloves’ lightweight 7-gauge design offers greater dexterity and flexibility

• Nitrile glove with acrylic black liner
• 13.4” (340mm) length
• EN 407 Protective gloves against thermal risks X1XXXX
• EN ISO 374-1:2016 Type A Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for chemical risks, AJKLOPT
• EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for micro-organisms risks
• Food safe
• EN 388:2016 Protective gloves against mechanical risks 3122A
• Level 3 Abrasion
• Level 1- Cut Resistance
• Level 2 Tear Resistance
• Level 2- Puncture
• Level A- ISO 13997 Cut Resistance

• Enhanced grip: Thanks to their ANSELL GRIP coating, AlphaTec 58-535W safety gloves
minimize the force required to handle oily or wet components

• Elevated comfort: Their white nylon inner liner enhances comfort and helps make them perfect for indoor applications

• Advanced defences: AlphaTec 58-535W work gloves’ bonded construction, featuring a coating polymer that doesn’t penetrate the liner in manufacture, limits liquid and chemical leakage

• Improved durability: They also boast ANSI/EN compliant abrasion resistance

• Specialized protection: Beyond chemical resistance, they satisfy EN 407 contact heat level 1, further enhancing workplace safety

• Nitrile glove with nylon white liner
• 13.4” (340mm) length
• EN 407 Protective gloves against thermal risks X1XXXX
• EN ISO 374-1:2016 Type A Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for chemical risks, AJKLOPT
• EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for micro-organisms risks
• Food safe
• EN 388:2016 Protective gloves against mechanical risks 3132A
• Level 3 Abrasion
• Level 1- Cut Resistance
• Level 3- Tear Resistance
• Level 2- Puncture
• Level A- ISO 13997 Cut Resistance

•Cut-protective chemical resistant glove with high visibility liner, for advanced
Protection

•Specialized protection: AlphaTec 58-735 chemical gloves’ nitrile barrier protects against common chemicals

•Enhanced features: The high-visibility inner liner indicates when the shell is compromised, warning users, while their foldable cuff can prevent chemicals running down the arm

•Heightened defences: AlphaTec 58-735 safety gloves’ INTERCEPT cut resistance knitwork ensures ANSI A3/EN ISO C cut protection

•Tightened grip: ANSELL GRIP nitrile shell treatment delivers better grip for handling both wet and oily components

•Optimized durability: AlphaTec 58-735 PPE gloves also achieve EN388:2016 Abrasion level 4 abrasion for longer wear

•Elevated comfort and dexterity: The liner’s integration into the nitrile shell ensures better fit, comfort and tactility

•Harm-free food handling: These AlphaTec gloves comply with EU and FDA food handing regulations, while Oeko-Tex Standard 100 approval certifies them free of substances considered harmful to human health
• 350mm length
• 18 Gauge
•EN 407 Protective gloves against thermal risks X1XXXX
•EN ISO 374-1:2016 Type A Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for chemical risks, AJKLMNOPT
• EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for micro-organisms risks
•EN 388:2016 Protective gloves against mechanical risks 4X32C
•Level 4- Abrasion
•Level X- Cut Resistance
•Level 3- Tear Resistance
•Level 2- Puncture
•Level C ISO 13997 Cut Resistance

• Automatic knit liner 100% Kevlar® fibre
• Comfort and sure grip
• Constructed from high-tech 100% Kevlar® para-aramid short fibres
• Exceptional cut resistance with dexterity
• Very high cut resistance to weight ratio
• Thumbslot for additional protection of the wrist
• Length: 10 inch

EN388:2003 134X
EN388:2016 133XC
EN407: X1XXXX

• Automatic knit liner 100% Kevlar® fibre
• Comfort and sure grip
• Constructed from high-tech 100% Kevlar® para-aramid short fibres
• Exceptional cut resistance with dexterity
• Very high cut resistance to weight ratio
• Thumbslot for additional protection of the wrist
• Length: 14 inch

EN388:2003 134X
EN388:2016 133XC
EN407: X1XXXX

• First glove to combine outstanding flame resistance with high cut protection and ergonomic design
• Materials used in the glove are inherently flame resistant, even after washing
• Arc Flash Hazard/Risk Category 1•: helps protect workers against arc flash hazards
• Exclusive composite yarn provides exceptional cut resistance for safe handling of sharp objects and materials
• Soft foam coating to ensure great flexibility and a secure grip in a variety of environments
• Ergonomic design for superior comfort and reduced hand fatigue
• Anti-static according to EN1149
• Arc Flash NFPA 70E - Test Method/Standard: ASTM F2675-22 - Result: Hazard/Risk Category (HRC) 1
• Category III
• EN 407 Protective gloves against thermal risks 4.1.2.1.1.0
• EN388:2016 Protective gloves against mechanical risks 2X42C

Ideal applications
• Equipment assembly, replacing filters and parts
• Facility and machinery maintenance
• Pipe installation and repair
• Carpentry/Scaffolding
• Heavy duty metal handling
• Heavy equipment and vehicle maintenance
• De-energised electrical wiring & clean-up

• Fully textured glove., with non-foaming formula, for a firm wet grip when handling objects
• Distinct colour to mask stains for special applications
• Contains no natural rubber latex and powdered free to help protect wearers from Type 1 skin allergies, skin irritation and dryness
• Higher tensile strength compared to both ASTM D6319 and EN 455 standards, allowing the hands to move freely and comfortably while wearing the Microflex 93-852

• Insole for the Steplite Easy Grip Wellington
• Extra thick felt insole
• Strong top layer for durability
• Warm felt for comfortable warm feet
• Gel latex bottom provides cushion & grip
• Antibacterial treatment
• Washable at 30°C

• Neotane material: proprietary polyurethane formulation: light, flexible, long lasting
• Standard fitting
• Available in non safety (04), steel toe cap (S4), toe cap and midsole (S5)
• Excellent grip
• Increased slip resistance: SRC approved
• Resistant to fats, manure and a variety of chemicals
• Kick-off spur
• Thermal insulation -20°C
• EN ISO 20347:2012 04.SRC.CI

• Neotane material: proprietary polyurethane formulation: light, flexible, long lasting
• Suitable for use in the food industry
• Standard fitting
• Safety: steel toe cap S4
• Excellent grip
• Increased slip resistance: SRC approved
• Resistant to fats, manure and a variety of chemicals
• Kick-off spur
• Thermal insulation -20°C
• PVC free
• RFID incl.
EN ISO 20345:2011 S4 .SRC CI

• Neotane material: proprietary polyurethane formulation: light, flexible, long lasting
• Suitable for use in the food industry
• Standard fitting
• Safety: steel toe cap S4
• Excellent grip
• Increased slip resistance: SRC approved
• Resistant to fats, manure and a variety of chemicals
• Kick-off spur
• Thermal insulation -20°C
• PVC free
• RFID incl.
EN ISO 20345:2011 S4 .SRC CI

• Neotane material: proprietary polyurethane formulation: light, flexible, long lasting
• Standard fitting
• Safety: steel toe cap and midsole S5
• Excellent grip
• Increased slip resistance: SRC approved
• Resistant to fats, manure and a variety of chemicals
• Kick-off spur
• Thermal insulation -20°C
EN ISO 20345:2011 S5 .SRC CI